What You Should Know About This Year

A Basic Guide to Roof Warning Line Systems

Working on roofs with slopes is one of the job risks that any roofing contractor must face each day. The use of proper fall protection systems is a requirement for roofing contractors working on roofs with a maximum slop of 4:12 as mandated by the fall protection laws of the government. There are different forms of roof fall protection systems, and the most popular is the roof warning line systems.

There are many reasons why roof warning line systems are very popular. Some of the reasons why warning line systems are popular include their ability to adapt to most geometries of roofs, portability, and low cost. The function of these warning lines is to enclose your work area perimeter using a line that is about the height of your waist. These lines are around as a warning to workers that they are dangerously nearing the edges of the roof.

To fence off any work area, you can find a flagged line from your warning line systems. A series of strands that have been installed about 6 to 10 feet from the edges of the roof are fastened to this line. Between the edges of the roof and the warning lines, work that is done will be supervised with the help of a safety monitor. As a way to monitor the safety of workers and roofing contractors working in these areas, these monitors alert them if they are nearing the edge.

The use of warning line systems offers many benefits. Just be sure to apply efficient handling, a smart game plan, and a few tricks. Through effective warning line systems, you ensure to keep the lives of your workers on the roof protected. Other benefits include reduction of labor and allowing workers to begin their tasks faster.

The basic requirements of warning line systems include access for material and men, a perimeter line, and certain details like protection from a hot pipe or a tear off chute.

From the edge of the roof, make room for at least 6 feet from it for setting up the perimeter line. If roofing contractors or workers require the use of equipment like a felt layer or a gravel buggy from the edge, the warning line should be at least 10 feet from the edge of the roof. This distance allows an additional safety measure. From above your roof deck, make sure to hang the flagged line from 34 inches to 39 inches. Nevertheless, you should check with state codes regarding the require flag line heights.

To add some protection to the unprotected edge of your loading area, the use of removable warning line systems helps. It is up to you to consolidate the ladder area with your loading area or set it in the same manner. You can also set up warning lines to your perimeter from the gates of the truck if you will be loading the roof using a lift-bed truck.

Case Study: My Experience With

Finding Ways To Keep Up With

You Might Also Like